Precaution to take at storage & fitting stages (For All Doors)

  • Store at cool & dry place
  • Avoid direct sunlight & water on stacking as it cause warping
  • Use proper level support at ground for stacking
  • Cover the stack with plastic to protect the doors from moisture, cement, sand and dust particles which may cause scratches / damage.
  • Do not put / store any heavy material on the doors as it may cause damage.
  • Apply wood primer coat on door as soon as possible. It helps to protect the dors from various climatic conditions. It help to avoid moisture attack and warping.
  • Select proper hinges as per size thickness.
  • Apply laminate / veneer on both sides of the doors. One side application cause imbalance in the structure of the doors.
  • Avoid long time storage at site, plan delivery schedules as per requirement.
  • It is advisable to fix screws & hardware by first drilling and than fastning by screw driver, using hammer may damage door.
  • Lipping (biding patti) is advisable, as it strengthens door and increases it’s life.
  • Order as per require size, as cutting size weakens the door, if unavoidable it is advisable to cut a maximum 10mm from each size equally.
  • If require pre plane for vision panel (glass gape) before ordering, so that provisions for same can be made while manufacturing.